In MPF, a “shot” is a switch (or combination) of switches that the player shoots for. Examples include:
- A standup target, drop target, or rollover lane
- A ramp, loop, or orbit
- A toy, subway, or VUK
Most shots have lights or LEDs associated with them which are on, off, flashing, and/or certain colors to reflect what “state” the shot is in.
Broadly speaking, a shot is anything the player shoots at during a game. It could be a standup target, a lane, a ramp, a loop, a drop target, a pop bumper, a toy, etc.
You can read the full shots documentation for details, but the short version is that in MPF, you define switches (or a sequence of switches) as a “shot”. Then whenever that shot is made, MPF posts events which you can use to trigger scores, achievements, shows, etc.
Some shots are made up of a single switch (like a standup target). But you can also configure shots that are only considered to be hit based on series of switches that must be hit in the right order within a certain time frame. For example, you might have an orbit shot with three switches: orbit_left, orbit_top, and orbit_right. You could configure one shot called left_orbit that’s triggered when the switches orbit_left, orbit_center, and orbit_right are hit (in that order) within 3 seconds, and you could configure a second shot called right_orbit that’s triggered when the switches orbit_right, orbit_center, and orbit_left are hit within 3 seconds. (So, same switches, but two different shots depending on the order they’re hit.)
The beauty of using shots is that you just define all the switches and timing once, and then every time you want to use that shot in your game, you just need to work with the “right_orbit” shot and not have to worry about all the details of the switches and timing.
You can also configure different “states” for shots, e.g. “What state is that shot in?” That can be things like lit, unlit, complete, flashing, etc. You can also configure shows for each state (the unlit state means the light is off, flashing means that the light is flashing, etc.), and you can configure different scoring based on whether state the shot is in (1,000 points if unlit, 5,000 if lit, etc.). All of this is completely configurable.
You can also group multiple shots into “shot groups” and then do certain things when all the shots in the group are in the same state. For example, you could have three standup targets configured as three separate shots that all start in the “unlit” state, but then once all three shots are advanced to the “complete” state, you could add 100,000 points and start another mode.
Shots are also are integrated into MPF’s modes system, so you can configure a shot to do different things in different modes.
For example, a ramp shot might do nothing more than score 1,000 points in your base mode, but when the multiball mode is running, that same shot would score a jackpot. You can also configure whether notification of a shot being hit is passed down from one mode to the lower priority modes below it. (In the jackpot example we just mentioned, you probably just want to score the million points for the jackpot if that shot is made while the multiball mode is running and not score the 1,000 points for that shot from the base mode even though the base mode is still running under the multiball mode.