Configuring Switches with LISY80

Related Config File Sections
switches:

LISY80 supports the System 80 switch matrix which consists of a maximum of 64 switches. The switch number in the manual of your machine can be used within MPF. However, you may not find all switches in your game manual as some switches are the same along all System80/80A/80B games and Gottlieb decided not to document them ;-). Those are the following (according to pinwiki.com):

  • 06 - left advance button (Sys80B only)
  • 07 - play / test switch
  • 16 - right advance button (Sys80B only)
  • 17 - left coin switch
  • 27 - right coin switch
  • 37 - center coin switch
  • 47 - replay button
  • 57 - plumb bob and ball roll tilts (these have the same switch assignment as the playfield tilt switch)

Note

The SLAM switch in system80, which is not part of the switch matrix and cannot be used in mpfserver for LISY80 in the current release.

You can start with this config:

switches:
    tilt:
        number: 57

Then just add your switches according to the manual of your machine. See switches: for more details about switches.